Excalibur

Automated Fault Insertion

"Automatically schedule wire harness faults for up to 210 channels."

Excalibur™ features:

	Trigger: A fault sequence can be triggered with a button, digital input, or software command.
	Fault Indicators: Every channel has an LED indicating whether a fault is currently active.
	Built-in Test: Excalibur™ can test itself to determine if it is functioning properly.
	High Current Modules: 5 Channels 40 Amps Open Circuit Short to Battery Short to Ground Short to Wire
	Low Current Modules: 15 Channels 5 Amps Open Circuit Short to Battery Short to Ground Short to Wire Resistance insertion Fully Fused

Excalibur™ is a modular relay matrix designed to simulate open circuits, shorts to battery, shorts to ground, shorted wires, and corroded contacts. It can be used to automatically verify software and hardware diagnostics on all wires going in and out of a controller. Excalibur's built-in real time fault scheduler can be used to simulate intermittent contacts and multi-point failures.